48Screen DescriptionConsole UIIdle Time Out:Displays the idle timeout settings (in minutes) for terminating aconsole-connected session if no input is made. The factory defaultsetting is 5 minutes.Telnet UI IdleTime Out:Displays the idle timeout settings (in minutes) for terminating aTelnet-connected session if no input is made. The factory default settingis 5 minutes.Telnet Server: Displays the Telnet access settings. 'Enabled' is the factory defaultsetting.Enabled: Access is enabled.Disabled: Access is disabled.SNMP Agent: Displays the SNMP access settings. 'Disabled' is the factory defaultsetting.Enabled: Access is enabled.Disabled: Access is disabled.Web ServerStatus:Displays the web access settings. 'Disabled' is the factory default setting.Enabled: Access is enabled.Disabled: Access is disabled.IP SetupInterface:Displays the access settings for the IP address configuration software,bundled with the Panasonic network cameras. 'Enabled' is the factorydefault setting.* For instructions, refer to Appendix C.Enabled: Access is enabled.Disabled: Access is disabled.Local UserName:Displays the current login username. 'manager' is the factory defaultsetting.SyslogTransmission:Displays the settings for sending system logs to the Syslog server.'Disabled' is the factory default setting.Enabled: Sends system logs to the Syslog server.Disabled: Does not send system logs to the Syslog server.
