42Screen DescriptionPort Displays the port number.Trunk Displays the group number for a trunked port.Type Displays the port type.100TX The port type is 10/100BASE-TX.1000T The port type is 10/100/1000BASE-T.1000X The port type is SFP port.Admin Displays the current port status. For all ports, 'Enabled' is the factory defaultsetting.Enabled The port is available.Disabled The port is not available.Link Displays the current link status.Up A link has been established successfully.Down A link has not been established.Mode Displays the communication speed and full-duplex/half-duplex settings. Forall ports, 'Auto' is the factory default setting.Auto Auto negotiation mode100-FDx(100F) 100 Mbps full-duplex100-HDx(100H) 100 Mbps half-duplex10-FDx(10F) 10 Mbps full-duplex10-HDx(10H) 10 Mbps half-duplexFlow Ctrl Displays the flow control settings. For all ports, 'Disabled' is the factorydefault setting.Enabled The flow control is enabled.Disabled The flow control is disabled.Auto-MDI Displays the Auto MDI function settings. For ports 1 to 24, 'Disabled' is thefactory default setting. (The settings for Ports 25 and 26 are fixed at"Enabled.")Enabled The Auto-MDI function is enabled.Disabled The Auto-MDI function is disabled.
