199Screen DescriptionRRP DomainNameDisplays the domain name.Node Type Displays the node role.Master Displays that the Switching Hub controls the ringoperation.Each domain has only one master node.Transit Displays that the Switching Hub is not a master node.Ring Status Displays the ring status.IDLE Displays that the Ring Redundant Protocol function isdisabled.Complete Displays that a ring topology has been correctlyestablished.This status is displayed for the master nodes only.Failed Displays that a ring topology has not been established.This status is displayed for the master nodes only.Link-Up Displays that a ring topology has been correctlyestablished.This status is displayed for the transit nodes only.Link-Down Displays that a ring topology has not been established.This status is displayed for the transit nodes only.Pre-ForwardingDisplays that a ring topology is being established.This status is displayed for the transit nodes only.Primary Port Displays the primary port.Primary PortStatusDisplays the primary port status.Unknown Displays that the domain is invalid.Fowarding Displays normal communication status.Down Displays that the port does not link up.Blocking Displays that no frames other than control frames arenot received.Primary PortRoleDisplays the primary port role.Upstream Operating as an upstream portDownstreamOperating as a downstream portSecondory Port Displays the secondary port.Secondory PortStatusDisplays the secondary port status.Unknown Displays that the domain is invalid.Fowarding Displays normal communication status.Down Displays that the port does not link up.Blocking Displays that no frames other than control frames arenot received.Secondory PortRoleDisplays the secondary port role.Upstream Operating as an upstream portDownstreamOperating as a downstream portPolling Interval Displays the polling interval.Fail Period Displays the timeout for polling.Ctrl VLAN Displays the set control VLAN ID.Data VLAN(s) Displays the set data VLAN ID.
