192Screen DescriptionRRP Status Displays the Ring Redundant Protocol function status.Enabled The Ring Redundant Protocol function is enabled.Disabled The Ring Redundant Protocol function is disabled. (Factorydefault setting)DomainNameDisplays the domain name.TotalDomainNumberDisplays the number of registered domains.(Up to eight groups can be registered.)Ctrl VLAN Displays the control VLAN ID.DataVLAN(s)Displays the data VLAN ID.RingStatusDisplays the ring status.IDLE Displays that the Ring Redundant Protocol function isdisabled.Complete Displays that a ring topology has been correctlyestablished.This status is displayed for the master nodes only.Failed Displays that a ring topology has not been established.This status is displayed for the master nodes only.Link-Up Displays that a ring topology has been correctlyestablished.This status is displayed for the transit nodes only.Link-Down Displays that a ring topology has not been established.This status is displayed for the transit nodes only.Pre-ForwardingDisplays that a ring topology is being established.This status is displayed for the transit nodes only.Node Type Displays the node role.Master Displays that the Switching Hub controls the ringoperation.Each domain has only one master node.Transit Displays that the Switching Hub is not a master node.
