Panasonic LP-GS Series Setup & Maintenance Manual

Also see for LP-GS Series: Serial Communication Command Guide Serial Communication Command Guide Quick reference Operation manual

Contents

Panasonic LP-GS Series Setup & Maintenance Manual Manual pdf 55 page image

55 Operator settings (restricted)This is the screen where you can edit and operate theenabled items only. Configure the enabled items for editingand operation on the system settings screen in advance.Main usages:• Change the specific items only.• Execute the specific actions only. MaintenanceThis is the screen used for the maintenance of the lasermarker.Main usages:• Check the runtime data.• Irradiate the laser for measurement. *• Simulate ON/OFF operation of the output signals• Confirm the communication command history.* To measure the laser output, you need a power meteravailable in stores. Data managementThis is the screen where you back up, add, or delete datasaved in the laser marker.Main usages:• Add/delete a marking file, graphic data, or font.• Acquire the backup of data saved in the laser marker.• Restore the backup data to the laser marker. System settingsThis is the screen where you configure the laser markeroperation settings, system clock, and communicationsettings, etc.Main usages:• Change the time of the system clock.• Configure the input to and output from the externaldevice and the communication settings.• Configure the setting items and password for theoperator settings screen.• Configure the laser power and offset value of themarking position for all the data in the laser marker.ME-LPGS-SM-8