784.5.10. ARP Table ConfigurationOn the Basic Switch Configuration Menu, pressing "R" opens the ARP Table screen,as shown in Fig. 4-30. On this screen, you can refer to and configure the ARP table.PN28248 Local Management SystemBasic Switch Configuration -> ARP TableSorting Method : By IPARP Age Timeout : 7200 secondsIP Address Hardware Address Type--------------- ----------------- --------------------------------------- -----------------------------------[N]ext Page [A]dd/Modify Static Entry[P]revious Page [D]elete EntrySet ARP Age [T]imeout [Q]uit to previous menu[S]orting Entry MethodCommand>Enter the character in square brackets to select optionFig. 4-30 ARP TableScreen DescriptionSorting Method Displays the order of displaying.By IP Displays in the order of IP address.By MAC Displays in the order of MAC address.By Static Type Displays addresses set manually.By Dynamic Type Displays addresses learned automatically.ARP Age Timeout Displays the age-out time of the ARP table.IP Address Displays the IP address entries on the ARP table.Hardware Address Displays the hardware address on the ARP table.Type Displays the type of the registered ARP entry.Static Indicates that the ARP entry has been set manually.Dynamic Indicates that the ARP entry has been learned auto-matically.
