714.5.8.b. MAC Address Learning Mode ConfigurationOn the Forwarding Database Menu, pressing "A" opens the MAC Learning Menuscreen, as shown inFig. 4-25. On this screen, you can configure the learning modesettings of the MAC address by port.PN28248 Local Management SystemForwarding Database Menu -> MAC Learning MenuPort MAC Learning------ ------------1 Auto2 Auto3 Auto4 Auto5 Auto6 Auto7 Auto8 Auto9 Auto10 Auto11 Auto12 Auto-------------------------------- -----------------------------------[N]ext Page [S]et MAC Learning Mode[P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-25 MAC Address Learning Mode ConfigurationScreen DescriptionPort Displays the port number.MAC Learning Displays the learning method of the MAC address."Auto" is the factory default setting.Auto The MAC address is automatically learned, and the packet trans-mission is executed.Disabled Auto-learning of MAC address is disabled, and packet transmis-sion is not executed unless the MAC address is registered stati-cally.Note: When the MAC address auto-learning is disabled, communication cannot beexecuted unless the MAC address is registered statically.Available commands are listed below.N Display the next page.Press "N" to display the next page.P Display the previous page.Press "P" to display the previous page.
