79Available commands are listed below.N Display the next page.Press "N" to display the next page.P Display the previous page.Press "P" to display the previous page.T Set the age-out time of the ARP table.Press "T." The command prompt changes to "Enter ARP age timeout value >." Enter the age-out time of the ARP table with a value of 30 to 86400 (seconds).S Select the order of displaying ARP table.Press "S." The command prompt changes to "Select method for sorting entry to display (I/ /M/T)." Enter "I" to display the order of IP Address, "M" to display the order of HardwareAddress, or "T" to display the order of Type.When you enter "T," the command prompt changes to "Select type for sorting entry to dis-play (S/D)>." Enter "S" to display addresses set manually or "D" to display addresses learnedautomatically.A Add or correct an entry of the ARP table.1. Press "A." The command prompt changes to "Enter IP address>." Enter an IP address.2. Then, the command prompt changes to "Enter Hardware address>." Enter MAC Addressin such way as "**:**:**:**:**:**."D Delete an entry of the ARP table.Press "D." The command prompt changes to "Enter IP address>." Enter an IP address.Q Return to the parent menu.
