744.5.8.d. Display of All MAC AddressesOn the Forwarding Database Menu, pressing "M" opens the Display MAC Addressby MAC screen, as shown in Fig. 4-27. On this screen, you can display all the MACaddress tables in this Switching Hub.PN28248 Local Management SystemForwarding Database Menu -> Display MAC Address by MACAge-Out Time: 300 Sec.MAC Address Port----------------- ----xx:xx:xx:xx:xx:xx CPU-------------------------------- -----------------------------------[N]ext Page Set [A]ge-Out Time[P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-27 Display of All MAC AddressesScreen DescriptionAge-Out Time: Displays the time to store the MAC address table. It is equal to the time afterreceiving the last packet. The factory default setting is 300 seconds (5 minutes).MAC Address Displays all the entries in the MAC address table.Port Displays the port to which the MAC address belongs.Available commands are listed below.N Display the next page.Press "N" to display the next page.P Display the previous page.Press "P" to display the previous page.A Set the time to store the MAC address.Press "A." The command prompt changes to "Enter Age-Out time>." Enter the age-out timewith a value of 10 to 1000000 (seconds).Q Return to the parent menu.
