Panasonic PN28248 Operation Manual

Also see for PN28248: Operation manual for cli

Contents

Panasonic PN28248 Operation Manual Manual pdf 40 page image

404.5.3. SNMP ConfigurationOn the Basic Switch Configuration Menu, pressing "N" opens the SNMP Configura-tion Menu screen, as shown in Fig. 4-10. On this screen, you can configure theSNMP agent settings.PN28248 Local Management SystemBasic Switch Configuration -> SNMP Configuration MenuSNMP [M]anagement ConfigurationSNMP [T]rap Receiver Configuration[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-10 SNMP ConfigurationScreen DescriptionSNMP Management Configuration Configures the SNMP manager settings. For details, refer tothe next section (4.5.3.a).SNMP Trap Receiver Configuration Configures the SNMP trap sending settings. For details,refer to the next section (4.5.3.b).Quit to previous menu Return to the parent menu.Available commands are listed below.M Configure the SNMP manager settings.Press "M" to move to the SNMP Management Configuration Menu.T Configure the SNMP trap settings.Press "T" to move to the SNMP Trap Receiver Configuration Menu.Q Quit the SNMP Configuration Menu and return to the parent menu.