694.5.8.a. Addition or Deletion of MAC AddressOn the Forwarding Database Menu, pressing "S" opens the Static Address TableMenu screen, as shown in Fig. 4-24. On this screen, you can add or delete MACaddresses statically.PN28248 Local Management SystemForwarding Database Menu -> Static Address Table MenuMAC Address Port VLAN ID----------------- ------ -------Database is empty!-------------------------------- -----------------------------------[N]ext Page [D]elete Entry[P]revious Page [Q]uit to previous menu[A]dd New EntryCommand>Enter the character in square brackets to select optionFig. 4-24 Addition or Deletion of MAC AddressScreen DescriptionMAC Address Displays all the entries in the MAC address table.Port Displays the port to which the MAC address belongs.VLAN ID Displays the VLAN ID to which the MAC address belongs.Available commands are listed below.N Display the next page.Press "N" to display the next page.P Display the previous page.Press "P" to display the previous page.A Execute additional registration of MAC address.1. Press "A." The command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx)." Entera MAC address to be added.2. The command prompt changes to "Add new entry->Enter port number>." Enter the portnumber to which the MAC address belongs.3. The command prompt changes to "Add new entry->Enter VLAN ID>." Enter the VLAN ID towhich the MAC address belongs with a value of 1 to 4094.
