684.5.8. Forwarding DatabaseOn the Basic Switch Configuration Menu, pressing "F" opens the Forwarding Data-base Menu screen, as shown in Fig. 4-23. On this screen, a list of MAC addresstables required for transferring packets that have been learned and recorded is dis-played.PN28248 Local Management SystemBasic Switch Configuration -> Forwarding Database Menu[S]tatic Address TableM[A]C LearningDisplay MAC Address by [P]ortDisplay MAC Address by [M]ACDisplay MAC Address by [V]ID[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-23 Reference to MAC Address TableScreen DescriptionStatic Address Table Adds or deletes MAC addresses.For details, refer to the next section (4.5.8.a).MAC Learning Configures the Auto/OFF settings of the MAC Learning function byport.When it is OFF, only the MAC addresses registered in "Static AddressTable" can be communicated. For details, refer to the next section(4.5.8.b).Display MAC Address byPortDisplays the MAC address table by port.For details, refer to the next section (4.5.8.c).Display MAC Address byMACDisplays all registered MAC addresses.For details, refer to the next section (4.5.8.d).Display MAC Address by VID Displays the MAC address table by VLAN.For details, refer to the next section (4.5.8.e).Quit to previous menu Return to the parent menu.
