1724.8.3. System RebootOn the Switch Tools Configuration Menu, pressing "R" opens the System RebootMenu screen as shown in Fig. 4-83. On this screen, you can reboot this SwitchingHub.PN28248 Local Management SystemSwitch Tools Configuration -> System Reboot MenuReboot Status: StopReboot Type: NormalReboot Timer: 0 secondsTime Left: N/A-------------------------------- -----------------------------------Set Reboot [O]ptionStart [R]eboot ProcessSet Reboot [T]imer[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-83 System RebootScreen DescriptionReboot Status Displays whether or not the reboot command is executed.Stop Displays that the reboot command is not executed.In Process Reboot in process or in waiting status set by the reboottimer.Reboot Type Displays the reboot type. The factory default setting is "Normal."Normal Normal reboot is executed.Factory Default All settings are reset to factory default.Factory DefaultExcept IPAll settings except the IP address are reset to factorydefault.Reboot Timer Displays the time between execution of the reboot command and actualreboot.The factory default setting is 0 second.Time Left Displays the time left before the system is actually rebooted after execution ofthe reboot command. A key entry refreshes the screen display, allowing you tocheck the elapsed time.
