1564.6.10.c. RRP Domain information MenuOn the Ring Redundant Protocol Configuration Menu, pressing "H" opens the RRPDomain information Menu screen as shown in Fig. 4-73. On this screen, you cancheck RRP domain information.PN28248 Local Management SystemRRP Management -> RRP Domain information MenuRRP Domain Name : Ring1RRP Node Type : TransitRRP Ring Status : IdlePrimary Port : 5Primary Port Status : DownPrimary Port Role : UpstreamSecondary Port : 6Secondary Port Status: DownSecondary Port Role : DownstreamPolling Interval : 1Fail Period : 2Control VLAN : 1000Data VLAN : 1Press any key to continue...Fig. 4-73 RRP Domain information MenuScreen DescriptionRRP DomainNameDisplays the domain name.Node Type Displays the node role.Master Indicates that the Switching Hub controls the ring operation.Each domain has only one master node.Transit Indicates that the Switching Hub is not a master node.Ring Status Displays the ring status.IDLE The Ring Redundant Protocol function is disabled.Complete The ring topology has been correctly established.This status is displayed for the Master nodes only.Failed The ring topology has not been established.This status is displayed for the Master nodes only.Link-Up The ring topology has been correctly established.This status is displayed for the Transit nodes only.Link-Down The ring topology has not been established.This status is displayed for the Transit nodes only.Pre-Forwarding The ring topology is being established.This status is displayed for the Transit nodes only.Primary Port Displays the primary port.
