534.5.6. Port Configuration Power SavingIn this Switching Hub, it is possible to reduce power consumption by utilizing ouroriginal function "MNO series power saving mode" that detects the connection sta-tus of ports automatically and saves power consumption to minimum, and theEnergy Efficient Ethernet (hereinafter referred to as EEE) of IEEE802.3az respec-tively.In addition, the MNO series power saving mode supports two modes: "Half mode"to prioritize connection with other devices and "Full mode" to save more powerconsumption.On the Basic Switch Configuration Menu, pressing "o" opens the Port Configura-tion Power Saving screen, as shown in Fig. 4-16. On this screen, you can displayport status and configure various power saving mode settings.PN28248 Local Management SystemBasic Switch Configuration -> Port Configuration Power Saving MenuPort Link Trunk Type Mode Power-Saving EEE(802.3az)---- ------ ----- ------ ----------- ------------ -------------1 Down --- 1000T Auto Half Enabled2 Down --- 1000T Auto Half Enabled3 Down --- 1000T Auto Half Enabled4 Down --- 1000T Auto Half Enabled5 Down --- 1000T Auto Half Enabled6 Down --- 1000T Auto Half Enabled7 Down --- 1000T Auto Half Enabled8 Down --- 1000T Auto Half Enabled9 Down --- 1000T Auto Half Enabled10 Down --- 1000T Auto Half Enabled11 Down --- 1000T Auto Half Enabled12 Down --- 1000T Auto Half Enabled-------------------------------- -----------------------------------[N]ext Page Set Power [S]aving Mode Set [E]EE Status[P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-16 Port Configuration Power Saving MenuScreen DescriptionPort Displays the port number.Link Displays the current link status.Up A link has been established successfully.Down A link has not been established.Trunk Displays the group number for a trunked port.Type Displays the port type.1000T The port type is 10/100/1000BASE-T.1000X The port type is SFP extension port.
