1544.6.10.b. RRP Domain Modification MenuOn the Ring Redundant Protocol Configuration Menu, pressing "M" opens the RRPDomain Modification Menu screen as shown in Fig. 4-72. On this screen, you canmodify the RRP domain settings.PN28248 Local Management SystemRRP Management -> RRP Domain Modification MenuRRP Domain Name : ring1 RRP Node Type : TransitPrimary Port : 23Secondary Port : 24Polling Interval : 1 Fail Period : 2Control VLAN : 1000Data VLAN : 1-------------------------------- -----------------------------------Set RRP Domain [N]ame Set Node [T]ypeSet [P]rimary Port Set [S]econdary PortSet P[o]lling Interval Set [F]ail PeriodSet [C]ontrol VLAN Set [D]ata VLAN[A]pply [Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-72 RRP Domain Modification MenuScreen DescriptionRRP DomainNameDisplays the domain name.RRP Node Type Displays the node role.Master Indicates that the Switching Hub controls the ring operation.Each domain has only one master node.Transit Indicates that the Switching Hub is not a master node.Primary Port Displays the primary port.Secondary Port Displays the secondary port.Polling Interval Displays the polling interval.Fail Period Displays the timeout for polling.Control VLAN Displays the control VLAN ID.Data VLAN Displays the data VLAN ID.
