944.6.1.e. VLAN Port Configuration MenuOn the VLAN Management Menu, pressing "S" opens the VLAN Port ConfigurationMenu screen, as shown in Fig. 4-38. On this screen, you can configure the VLAN-related settings by port.PN28248 Local Management SystemVLAN Management -> VLAN Port Configuration MenuPort PVID Acceptable Frame Type---- ---- ---------------------1 1 Admit All2 1 Admit All3 1 Admit All4 1 Admit All5 1 Admit All6 1 Admit All7 1 Admit All8 1 Admit All-------------------------------- -----------------------------------[N]ext page Set [F]rame Type[P]revious Page [Q]uit to previous menuSet Port [V]IDCommand>Enter the character in square brackets to select optionFig. 4-38 VLAN Port Configuration MenuScreen DescriptionPort Displays the port number.PVID Displays the PVID (Port VLAN ID) that has been set to the port. The PVID displaysthe VLAN ID to which an untagged packet should be transferred when it wasreceived. The factory default setting is "1." When a tagged packet was received,the destination port is determined by referring to the tag regardless of the PVID.AcceptableFrame TypeDisplays the type of frames to be received.Admit All Receives all frames.TaggedOnlyReceives only the tagged frames.
