1164.6.5.c. Egress Rate Limiting Configuration MenuOn the Quality of Service Configuration Menu, pressing "WE" opens the EgressRate Limiting Configuration Menu screen, as shown in Fig. 4-52. On this screen,you can configure the bandwidth control settings.PN28248 Local Management SystemQuality of Service Configuration -> Egress Rate Limiting Configuration MenuPort Bandwidth Status---- ----------- --------1 1000 Disabled2 1000 Disabled3 1000 Disabled4 1000 Disabled5 1000 Disabled6 1000 Disabled7 1000 Disabled8 1000 Disabled9 1000 Disabled10 1000 Disabled11 1000 Disabled12 1000 DisabledNote: Bandwidth - 1Mbps/unit-------------------------------- -----------------------------------[N]ext Page Set [S]tatus[P]revious Page [Q]uit to previous menuSet [B]andwidthCommand>Enter the character in square brackets to select optionFig. 4-52 Egress Rate Limiting Configuration MenuScreen DescriptionPort Displays the port number.Bandwidth Displays the bandwidth. The factory default setting is 1000. (The unit isMbps)Status Displays whether the bandwidth control settings are enabled or disabled.Enabled The bandwidth control settings are enabled.Disabled The bandwidth control settings are disabled.
