1194.6.6. Storm Control Configuration MenuOn the Advanced Switch Configuration Menu, pressing "O" opens the Storm Con-trol Configuration Menu screen, as shown in Fig. 4-54. On this screen, you can con-figure the settings of storm control of unknown unicast, broadcast, and multicast.PN28248 Local Management SystemAdvanced Switch Configuration -> Storm Control Configuration MenuPort Storm Control Setting:No. DLF Broadcast Multicast Threshold---- --------- --------- --------- ---------1 Disabled Disabled Disabled 02 Disabled Disabled Disabled 03 Disabled Disabled Disabled 04 Disabled Disabled Disabled 05 Disabled Disabled Disabled 06 Disabled Disabled Disabled 07 Disabled Disabled Disabled 08 Disabled Disabled Disabled 09 Disabled Disabled Disabled 010 Disabled Disabled Disabled 0-------------------------------- -----------------------------------[N]ext Page Set [B]roadcast Status [Q]uit to previous menu[P]revious Page Set [M]ulticast StatusSet [D]LF Status Set [T]hreshold ValueCommand>Enter the character in square brackets to select optionFig. 4-54 Storm Control ConfigurationScreen DescriptionDLF: Enables/disables the unknown unicast storm control.Enabled The unknown unicast storm control is enabled.Disabled The unknown unicast storm control is disabled. (Factory default set-ting)Broadcast: Enables/disables the broadcast storm control.Enabled The broadcast storm control is enabled.Disabled The broadcast storm control is disabled. (Factory default setting)Multicast: Enables/disables the multicast storm control.Enabled The multicast storm control is enabled.Disabled The multicast storm control is disabled. (Factory default setting)Threshold: Displays the threshold of the number of packets (Packet Per Second).
