1744.8.4. Exception HandlerOn the Switch Tools Configuration Menu, pressing "x" opens the Exception Han-dler screen as shown in Fig. 4-84. On this screen, you can configure the exceptionhandling operations.PN28248 Local Management SystemSwitch Tools Configuration -> Exception HandlerException Handler: DisabledException Handler Mode: Debug Message-------------------------------- -----------------------------------Enable/Disable E[x]ception HandlerSet Exception Handler [M]ode[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-84 Exception Handler ConfigurationScreen DescriptionException Handler Displays the exception handling function status."Disabled" is the factory default setting.Enabled The exception handler is enabled.Disabled The exception handler is disabled.Exception Handler Mode Displays the exception handling method."Debug Message" is the factory default setting.Debug Message Outputs a debug message to the console whenexception handling is detected.System Reboot Automatically reboots when exception handlingis detected.Debug Message andSystem RebootOutputs a debug message to the console andthen automatically reboots when exception han-dling is detected.
