764.5.9. SNTP ConfigurationIn this Switching Hub, it is possible to set the time accurately by synchronizing theinternal clock to an external SNTP server's clock via SNTP (Simple Network TimeProtocol).On the Basic Switch Configuration Menu, pressing "T" opens the Time Configura-tion Menu screen, as shown in Fig. 4-29. On this screen, you can configure theSNTP settings.PN28248 Local Management SystemBasic Switch Configuration -> Time Configuration MenuTime ( HH:MM:SS ) : xx:xx:xxDate ( YYYY/MM/DD ) : xxxx/xx/xx xxxxxxSNTP Server IP : x.x.x.xSNTP Polling Interval : 1440 MinTime Zone : (GMT+09:00) Osaka,Sapporo,TokyoDaylight Saving : N/A-------------------------------- -----------------------------------Set SNTP Server I[P]Set SNTP [I]ntervalSet Time [Z]oneS[e]t Daylight Saving[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-29 SNTP Configuration MenuScreen DescriptionTime(HH:MM:SS): Displays the time of the internal clock.Date(YYYY/MM/DD): Displays the date of the internal clock.SNTP Server IP: Displays the IP address of the SNTP server that executes time synchroni-zation.SNTP Polling Interval: Displays the interval of time synchronization with the SNTP server.Time Zone: Displays the time zone.Daylight Saving: Displays the application status of Daylight Saving (Summer time).
