1154.6.5.b. Scheduling MethodOn the Quality of Service Configuration Menu, pressing "C" opens the SchedulingMethod screen, as shown in Fig. 4-51. On this screen, you can configure the sched-uling method settings.PN28248 Local Management SystemQuality of Service Configuration -> Scheduling MethodScheduling Method: StrictTraffic Class Weight------------- ------0 11 22 33 4-------------------------------- -----------------------------------[S]et Scheduling MethodSet Traffic Class-Weight [M]apping[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-51 Scheduling MethodScreen DescriptionScheduling Method: Displays the scheduling method of the QoS function.Strict PQ: Strict priority queuing (Factory default setting)WeightedRound RobinWRR: Weighted round robin schedulingTraffic Class Displays the priority of packets.Weight Displays the weight to distribute packets.Available commands are listed below.S Select the scheduling method of the QoS function.Press "S" to change the command prompt to "Select scheduling method (S/W)>." Enter "S"to use Strict Priority Queueing or "W" to use Weighted Round Robin.M Set the weight to priority (Traffic Class).1. Press "M" to change the command prompt to "Enter traffic class>." Enter a Traffic Class(0 to 3).2. Then, the command prompt changes to "Enter weight for traffic class #>." Enter weight(1 to 127).Q Return to the parent menu.
