1684.8.1. TFTP Software UpgradeOn the Switch Tools Configuration Menu, pressing "T" opens the TFTP SoftwareUpgrade screen as shown in Fig. 4-80. On this screen, you can execute and config-ure firmware upgrades.PN28248 Local Management SystemSwitch Tools Configuration -> TFTP Software UpgradeImage Version: x.x.x.xxTFTP Server IP: 0.0.0.0Image File Name:Reboot Timer: 0 seconds(Please set timer value at Reboot Menu)-------------------------------- -----------------------------------Set TFTP [S]erver IP AddressSet Image [F]ile Name[U]pgrade Image[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-80 TFTP Software UpgradeScreen DescriptionImage Version Displays the current firmware version.TFTP Server IP Displays the IP address of the TFTP server with the firmware to be upgradedinstalled.Image File Name Displays the file name of the firmware to be upgraded.Reboot Timer Displays the time before booting after downloading the firmware.You can set the time in "System Reboot Menu."Available commands are listed below.S Set the IP address of the TFTP server with the firmware to be upgraded installed.Press "S." The command prompt changes to "Enter IP address of TFTP server>." Enter the IPaddress of the TFTP server.F Set the file name of the firmware to be upgraded.Press "F." The command prompt changes to "Enter file name>." Specify the file name in 39characters or less.U Start the upgrade.Press "U." The command prompt changes to "Download file(Y/N)>." Confirm whether ornot you wish to start the process. Confirm that all settings are correct. Press "Y" to start theupgrade. If you have find an error in settings, press "N" to return to the original status.Q Return to the parent menu.
