1354.6.9.b. PoE Global Configuration MenuOn the Power Over Ethernet Configuration Menu, pressing "G" opens the PoEGlobal Configuration Menu as shown in Fig. 4-62. On this screen, you can config-ure the PoE settings.PN28248 Local Management SystemPower Over Ethernet Configuration -> PoE Global Configuration MenuPower Budget : 185WPower Consumption : 0WPower Usage Threshold For Sending Trap: 50 %Power Management Method : Deny next port connection, regardless of priority-------------------------------- -----------------------------------Set Power [U]sageSet Power [M]anagement Method[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-62 PoE ConfigurationScreen DescriptionPower Budget Displays the maximum amount of power this Switching Hub can supply.Power Consump-tionDisplays the value of power supplied by this Switching Hub.Power UsageThreshold forSending TrapDisplays the power supply threshold for sending a trap."50 %" is the factory default setting.Power Manage-ment MethodDisplays the power supply method when the supplied power exceeds PowerBudget."Deny next port connection, regardless of priority" is the factory default setting.Deny next port connection,regardless of priorityStops power supply to the port connected imme-diately before Power Budget was exceeded.Low priority port will beshut downStops power supply to the port with the lowestpriority.If multiple ports have the same priority, powersupply to a port with a larger port number isstopped.
