1604.6.11.a. Loop History InformationOn the Loop Detection Configuration Menu, pressing "I" opens the Loop HistoryInformation screen, as shown in Fig. 4-75. On this screen, you can view the loopdetection date and time and a list of event information.PN28248 Local Management SystemLoop Detection Configuration Menu -> Loop History InformationEntry Time(YYYY/MM/DD HH:MM:SS) Event----- ------------------------- ---------------------------------------------1 2001/01/01 00:00:33 The loop detected between port 1 and 42 2001/01/01 00:01:33 Port 1 auto recovery-------------------------------- -----------------------------------[N]ext Page[P]revious Page[C]lear Loop Detection History[Q]uit to previous menuCommand>Enter the character in square brackets to select optionFig. 4-75 Loop History Information ViewScreen DescriptionEntry Displays the event number.Time Displays the time when the event occurred, or the time accumulated after boot if theclock is not set.Event Displays the description of the event caused to the Switching Hub.The loop detected on portX. A loop was detected and connection was blocked on aSwitching Hub in Port X.The loop detected betweenportX and portY.A loop was detected and connection was blocked on aSwitching Hub between Port X and Port Y.PortX auto recovery. The blocked Port X was automatically recovered.Available commands are listed below.N Display the next page.Press "N" to display the next page.P Display the previous page.Press "P" to display the previous page.C Delete the history information of the Loop History function.Q Return to the parent menu.
