Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 48 page image

481. Basic operations1-10-4. Memory previewThe video effects in the shot memory or event memory canbe output to the program signals after checking them usingthe memory preview bus (MEM-PVW).1 Press the e button to light its indicator, and display theShot Memory menu (or Event Memory menu).2 Use [F1] to display the MEM PVW sub menu.3 Use [F2] to select “MEM-PVW” using the Mode item.PGM The video effects are output to the programsignals.MEM-PVW The video effects are first output to thememory preview bus (MEM-PVW) and thenoutput to the program signals.Output:MEM-PVWOutput:PGMMode:MEM-PVWMode:PGMShot memory/Event memoryMemory preview busRecalledProgram busProgram images Preview images The resolution of the images output from the memoriesis lower than normal.Memory recall1 Press the [SHOT MEM] or [EVENT MEM] button of thememory whose video effects are to be recalled to selectthe memory.(Press the button of the memory with the video effectsfor preview playback.)Depending on the operation performed last, theindicator of the [STORE] button, [RECALL] button,[DEL] button or [EDIT] button lights up.2 Select the bus (BKGD, Key, PinP1 or PinP2) to berecalled from the memory.From the Shot Memory menu (or Event Memory menu),select the Recall Select sub menu, and then select “On”or “Off”. Refer to “1-10-6. Selecting the buses whose settingsare to be registered and or played back”.3 When selecting materials using the crosspoint buttonson the operation panel instead of using the registered“Material selection” item materials, press the [XPTDSBL] button to light its indicator in red. Refer to“1-10-1. Memory registration and recallitems”.4 Press the [RECALL] button.The [RECALL] button indicator lights up, and thenumber key in which the memory is registered lights ingreen.The operations of other memory buttons —[EVENT MEM] (or [SHOT MEM]), [PLUGIN MEM1] and[PLUGIN MEM2] — no longer take effect.5 Press the P button, and press the number key (1 to10) corresponding to the page number.Preview playback (output to the memory previewsignals)6 Press the number key (1 to 10) corresponding to thenumber for the preview playback memory.The preview images are output to the memory previewbus (MEM-PVW). During preview playback, the number keycorresponding to the memory number blinks in green. If there is a PAUSE event, preview playback pauses atthat event, and the number key corresponding to thememory number blinks in amber.Each time the number key corresponding to thememory number is pressed, preview playback orpause is selected alternately, and this selection isrepeated. When preview playback is completed, the indicators ofthe number key corresponding to the memory numberand [TAKE/ENTER] button light in amber.If the number key corresponding to the memorynumber is now pressed again, preview playbackresumes.