Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 27 page image

271. Basic operations1-3-9. Flying keyUsing DVE effects, this key enables the key signals that havebeen input to be moved, expanded or contracted.In order for the flying key to take effect, select “SQ2: 8” as thekey transition. Refer to “1-2-1. Selecting the wipe pattern”.When the key transition is executed, the keys are combinedby the key signals set using the flying key menu.(The transition effect is fixed at MIX.)Since the flying key uses DVE effects, the image is delayed byone frame.1 Press the k button to light its indicator, and display theKey menu.2 Use [F1] to display the Flying Key sub menu.3 Use [F2] to set the X coordinate of the key signal usingthe X-Pos item.4 Use [F3] to set the Y coordinate of the key signal usingthe Y-Pos item.5 Use [F4] to set the key signal change size (max. 400:400 %) using the Size item.Key signal When combined usingthe flying keyABC ABCIn order to add the edge of the key before the DVE effect,the thickness of the edge is also changed when the size ischanged.PinP combinations using the flying keyWhen “Full” is selected using the Type item in “1-3-1.Selecting the key type”, PinP combinations can be performedusing the flying key.(At this point in time, the Clip item and Gain item cannot beset on the Adjust sub menu.)With the full key, the image on the full screen serves as thekey source signal so an edge will not be added unless afurther step is taken.To add an edge, mask the key signals so that the key sourcesignals are made smaller than the entire screen. For details on masking, refer to “1-3-8. Masking the keysignals”.1-3-10. Setting the priorityThe relative positions of the images when key, PinP1 andPinP2 images are to be superimposed onto one another canbe set.1 Press the k button to light its indicator, and display theKey menu.2 Use [F1] to display the Key Priority sub menu.3 Use [F2] to [F4] to set the relative positions using theLow item, Middle item and High item.Low This is used to set the image to be placed atthe bottom.Middle This is used to set the image to be placed inthe middle.High This is used to set the image to be placed atthe top.Low:KeyMiddle:PinP1High:PinP2