Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 104 page image

1043. System settings3-3. Button assignments3-3-1. Setting the user buttonsThe user can assign several functions which can be set usingthe menu items into eight user buttons (U1 to U8).The user buttons light in amber when the assigned function isON and are off when the assigned function is OFF.Each time the user button is pressed, the function settingalternates between ON and OFF.The table below lists the functions which can be assigned tothe user buttons (U1 to U8).Function name Description of functionKey PVW Output the key image to the preview output.PinP PVW Outputs the PinP1 and PinP2 imagessimultaneously to the preview output.PinP1 PVW Output the PinP1 image to the preview output.PinP2 PVW Output the PinP2 image to the preview output.DSK PVW Output the DSK image to the preview output.GPII-EN Enables or disables GPI-In.GPIO-EN Enables or disables GPI-Out.SHIFT Switches all the A/B bus and AUX buscrosspoints between front and rear.AUX Trans Enables or disables the AUX bus transitions.PinP Trans Enables or disables the PinP bus transitions.EFF DSLV Switches effect dissolve between ON andOFF.w Default settingsButton Function name Button Function nameU1 KEY PVW U5 AUX TransU2 PinP PVW U6 EFF DSLVU3 DSK PVW U7 SHIFTU4 PinP Trans U8 None When a plug-in software application is introduced, thefunctions inherent to that application are sometimesadded as the functions which are assigned.1 Press the s button to light its indicator, and display theConfig menu.2 Use [F1] to display the User Button1 sub menu andUser Button2 sub menu. User Button1 sub menu3 Use [F2] to select the function to be assigned to the[U1] button using the User1 item.4 Use [F3] to select the function to be assigned to the[U2] button using the User2 item.5 Use [F4] to select the function to be assigned to the[U3] button using the User3 item.6 Use [F5] to select the function to be assigned to the[U4] button using the User4 item. User Button2 sub menu7 Use [F2] to select the function to be assigned to the[U5] button using the User5 item.8 Use [F3] to select the function to be assigned to the[U6] button using the User6 item.9 Use [F4] to select the function to be assigned to the[U7] button using the User7 item. Use [F5] to select the function to be assigned to the[U8] button using the User8 item.