Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 88 page image

882. Input/output signal settings2-2-1. Assigning the output signalsThe output signals can be assigned to the SDI OUT1 to SDIOUT5 connectors and DVI OUT connector.1 On the Output sub menu, use [F2] to select the outputto be set using the Select item. Refer to “2-2. Output signal settings”.2 Use [F1] to display the Assign sub menu.3 Use [F2] to set the type of output signal using theSource item.PGM An image provided with the wipe, mix, key,downstream key or other effect is output atthe switcher’s main line output.PVW This is the preview output that enables thenext operation to be checked before it isexecuted.AUX1 to 4 The signals selected by the 4 lines of AUXbuses (AUX1 to AUX4) are output.CLN The clean signal (the image resulting whenthe key, downstream key or other effecthas been removed from the PGM signal) isoutput. Refer to “Assigning the CLN signal”.MV The multi view display signals are output.Multiple input signals and output signals arereduced in size and output to one screen.KeyOut The key signal is output.MEM-PVW In the memory preview mode, the shotmemory and event memory effects are outputto preview.Proc.FG The process foreground image in the chromakey is output.4 Use [F3] to set the output mode using the Mode item.Normal The same signals as the system formatsignals are output.DownConvert(down-converter)This can be selected when the SDI outputboard (option: AV-HS04M7) has beenconnected.When the system format is 1080/59.94i or720/59.94p, the signals are output in the480/59.94i format.When the system format is 1080/50i or720/50p, the signals are output in the 576/50iformat.When the system format is SD (480/59.94i or576/50i), this setting cannot be selected.Assigning the CLN signalSet KEYCLN or DSKCLN as the CLN output.1 Press the s button to light its indicator, and display theConfig menu.2 Use [F1] to display the Assign sub menu.3 Use [F3] to select the type of output signal using theCLN item.Key The PGM signals minus the key effects areoutput.The Key, PinP1, PinP2 and DSK effects arenot added.DSK The PGM signal minus the downstream keyeffects are output.2-2-2. Setting the SDI output color rangeThe color range can be set for the SDI output signal images.p The same setting applies to all the SDI output signals.1 On the Output sub menu, use [F5] to set the color rangeusing the SDI Limit item. Refer to “2-2. Output signal settings”.Off The color range is not restricted.108 The amplitude level of the colors (R, G andB) is restricted to 0 % - 108 %.104 The amplitude level of the colors (R, G andB) is restricted to 0 % - 104 %.100 The amplitude level of the colors (R, G andB) is restricted to 0 % - 100 %.