Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 85 page image

852. Input/output signal settings2-1-11. Displaying the DVI input signal informationThese are used to display the information concerning the DVI-D input signal images.The information cannot be changed.1 On the Input sub menu, use [F2] to select the input to be set using the Select item. Refer to “2-1. Input signal settings”.2 Use [F1] to display the DVI Status sub menu.Size This indicates the pixel count of the images.Dot Clock This indicates the dot clock frequency of theimages.H-Frequency This indicates the horizontal frequency of theimages.V-Frequency This indicates the vertical frequency of theimages.The formats supported are listed below.

Input video signal Dot clock frequency(MHz)FrequencyHorizontal(kHz)Vertical(Hz)XGA 1024  768 Digital 65.0 48.36 60.00WXGA 1280  768 Digital 79.5 47.78 59.87SXGA 1280  1024 Digital 108.0 63.98 60.02WSXGA+ 1680  1050 Digital 146.2 65.29 59.95UXGA 1600  1200 Digital 162.0 75.00 60.00WUXGA 1920  1200 Digital 154.0 74.04 59.951080/50p 1920  1080 Digital (RGB) 148.5 56.25 50.001080/59.94p 1920  1080 Digital (RGB) 148.5/1.001 67.50/1.001 60.00/1.0011080/50i 1920  1080 Digital (RGB) 74.25 28.13 50.001080/59.94i 1920  1080 Digital (RGB) 74.25/1.001 33.72 60.00/1.001720/50p 1280  720 Digital (RGB) 74.25 37.50 50.00720/59.94p 1280  720 Digital (RGB) 74.25/1.001 44.96 60.00/1.001p If the format of the input signals is not supported, it may not be possible to import the signals properly, and a black image ordisturbed image may appear.