Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 46 page image

461. Basic operations1-10-1. Memory registration and recall itemsApplicable bus Material selection Transition Pattern MenuBKGD  PGM/A bus PST/B bus Fader amount Wipe direction BKGD patterns(MIX, WIPE) Background Color BackgroundKey  Key Fill bus Key Source bus Fader amount Wipe direction KEY patterns(MIX, WIPE) Key Chroma KeyPinP1  PinP1 bus  PinP1 ON/OFF  PinP1PinP2  PinP2 bus  PinP2 ON/OFF  PinP21-10-2. Storing the settings in the memory (Store)Images and operations to be registered can be set and then registered in the memories.4INSMENUINPUTVMEMBKGDPATTKEYPATTTAKEENTER� / +PAGEPLAYRECSTOPXPTDSBL＜CLIP 1STILL 1MEMORY / WIPE PATTERN / 10 KEY＜＜ TRIM OFF＞＞CLIP 2STILL 2REVTRIM OUTTRIM IN9PASTE6MOD3REVCUNDO8COPY5DEL2＞.＞＞7NEW1＜0/10＜＜STORERECALLEDITDELSHOTMEMEVENTMEMPLUGINMEM1PLUGINMEM2＞1 Using the unit, set the images or operations to be keptin the memory.To register event memory, refer to “w Creating a newtimeline” in “1-10-9. Editing event memory timelines”.2 Press the [SHOT MEM] or [EVENT MEM] button of thememory in which the images or operations are to beregistered.Depending on the operation that was performed last,the [STORE] button, [RECALL] button, [DEL] button or[EDIT] button lights.3 Select the bus (BKGD, KEY, PinP1 or PinP2) to beregistered in the memory.From the Shot Memory menu (or Event Memory menu),select the Store Select sub menu, and then select “On”. Refer to “1-10-1. Memory registration and recallitems” and “1-10-6. Selecting the buses whosesettings are to be registered and or played back”.4 When registering the BKGD (PGM/A or PST/B bus),KEY bus, PinP1 bus or PinP2 bus, set whether the“Material selection” item is to be stored.From the Shot Memory menu (or Event Memory menu),select the XPT Disable sub menu, and then select “Off”. Refer to “1-10-1. Memory registration and recallitems” and “1-10-7. Registering the material selectionitems”.5 Press the [STORE] button.The [STORE] button indicator lights up, and theoperations of other memory buttons — [EVENT MEM](or [SHOT MEM]), [PLUGIN MEM1] and[PLUGIN MEM2] — no longer take effect.6 Press the P button, and press the number key (1 to10) corresponding to the page number.7 Hold down (for 2 seconds or so) the number key (1 to10) corresponding to the number of the memory to beregistered.When the registration is completed, the number keycorresponding to the memory number lights in green. The number keys whose indicators are lit in greenhave memories already registered in them. Delete thememory corresponding to the number key concerned,and register the new memory.8 Repeat the above steps to register other kinds ofsettings in the memories.