Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 76 page image

762. Input/output signal settings2-1-2. Setting the input modeThe mode can be set for each input only when HD has been selected as the system format.When SD is selected as the system format, the input mode is always the same as Normal.1 On the FS sub menu, use [F3] to set the input mode using the Mode item.Normal Input signals in conformity with the system format take effect.Dot by Dot When SD signals with the same frame rate as the system format have been input, they are input on a dot by dot (1magnification) basis with no up-conversion. (This setting is only possible when the system format is 1080i.)In this mode, there is minimal deterioration in the image quality and, as such, the mode is used to combine SD formatmaterial using the PinP function.Up Convert When SD signals with the same frame rate as the system format have been input, they are up-converted.Auto Input signals in conformity with the system format take effect.Furthermore, if SD signals with the same frame rate as the system format are input when HD is selected as the systemformat, they are up-converted. In the Auto mode, the images may be disturbed when the input signals are switched.System ModeInput480/59.94i576/50i1080/59.94i1080/50i1080/24PsF1080/23.98PsF720/59.94p720/50pSD 480/59.94i —  w w w w w w w576/50i — w  w w w w w wHD 1080/59.94i Normal w w  w w w w wDot by Dot  w w w w w w wUp Convert  w w w w w w wAuto (Up Convert) w  w w w w w1080/50i Normal w w w  w w w wDot by Dot w  w w w w w wUp Convert w  w w w w w wAuto w (Up Convert) w  w w w w1080/24PsF Normal w w w w  w w wDot by Dot w w w w w w w wUp Convert w w w w w w w wAuto w w w w w w w w1080/23.98PsF Normal w w w w w  w wDot by Dot w w w w w w w wUp Convert w w w w w w w wAuto w w w w w w w w720/59.94p Normal w w w w w w  wUp Convert  w w w w w w wAuto (Up Convert) w w w w w  w720/50p Normal w w w w w w w Up Convert w  w w w w w wAuto w (Up Convert) w w w w w   denotes a black screen. The Up Convert mode or Auto mode cannot be selected for inputs 1 to 4. If Dot by Dot, Up Convert or Auto mode is selected, the frame synchronizer will be turned on. The input mode cannot be changed when freeze is set to on.