Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 60 page image

601. Basic operations1-11-1. Recording still images (Still)1 Press the v button to light its indicator, and display theVideo Memory menu.2 Use [F1] to display the Video Memory3 sub menu.3 Use [F5] to select “Off” using the Rec Lock item. When the unit’s power has been turned back onafter it was turned off, the Rec Lock item setting isrestored to “On”.4 Use [F1] to display the Video Memory1 sub menu.5 Use [F2] to select “Still1” or “Still2” using the Select item.6 Use [F1] to display the Rec1 sub menu.7 Use [F2] to set the images to appear on the built-indisplay using the Preview item.On The image appearing on the built-in display isforcibly switched to the image to be recorded(AUX1 to AUX4 selected using the V Sourceitem) instead of the material selected by theDISP bus.Off The image source selected by the DISP busis displayed as a preview.When “On” is selected for the Preview item, be awarethat the following operations will occur: The DISP button will link with the AUX bus selectionbutton (AUX BUS DELEGATION) of AUX1 to AUX4selected in the V Source item, which will light or turnoff the buttons. If the material of the DISP bus is changed, thematerials of the DISP bus and the selected AUX buschange at the same time.Similarly, if the material of the selected AUX bus ischanged, the material of the DISP bus changes at thesame time.8 Use [F3] to set the image to be recorded in the videomemory using the V Source item.AUX1 toAUX4The output signals of the AUX buses (AUX1to AUX4) are recorded as the material.9 Use [F5] to set the review display using the Review item.On After the images have been recorded, theimages of the video memory recorded in theAUX bus are displayed (for 2 seconds or so).Off The review display is not shown. Use [F1] to display the Video Memory1 sub menu. As soon as [F3] (Rec) is pressed, the still images arerecorded. If the [VMEM] button on the right of the number keysis pressed and the video memory operation mode hasbeen established, the operation of this button is linkedwith the [XPT/DSBL] button among the number keys. When the recording of the still images is completed,thumbnails of the still images are displayed in thethumbnail screen.