691. Basic operations1-12-3. Loading data from memory cards1 Insert the memory card on which the data is stored intothe memory card slot.Load the file after its data has been stored in the eachfolder.Data stored in other folders will not be recognized bythe unit.For the destinations where the data is stored, refer to folder configuration>.2 On the SD Card menu, use [F1] to display the File1 submenu.3 Use [F2] to select “Load” using the Mode item, and thenpress the [F2].When [F2] is pressed, the file selection screen isdisplayed. of what appears on the file selection screen>4 Use [F1] to select the type of file to be loaded using theSELECT item. Correlation between [F1] (for selecting a settingusing the SELECT item) and [F3] on the fileselection screen[F1]Settings selectedusing SELECT item[F3]Displays and functionStill1, Still2,Clip1, Clip2F3: LIST VIEWUsing the [F3], it is possible to switchthe screen display between“List (list files)” and “Thumbnail (displaythumbnails)”.Shot, Event, Set Up,All, UpgradeF3:The [F3] cannot be operated.On the screen, the list of files isdisplayed.Plug-in F3: INDEXUsing the [F3], it is possible to selectthe index number (1 to 10) of the filesto be loaded.On the screen, the list of files isdisplayed.5 Use [F2] to select the name of the file to be loadedusing the SELECT FILE item.If the name of the file to be loaded consists of morethan 8 characters, a shortened version of the filenamewill be displayed. When “Plug-in” has been selected using [F1](SELECT item), use [F3] to select the index number(1 to 10) of the files to be loaded. Up to 100 files can be loaded from one folder. The following alphanumerics and symbols can beused as the characters for filenames (see below).Files using other characters will not be displayed bythe unit.A to Z, a to z, 0 to 9, ! # $ % & ' ( ) - . @ ^ _ ` { }6 Use [F4] to load the file.Thumbnail displayFor Still thumbnails, the image is displayed in the upperportion, and the file name, KEY indicator, image size, and filedate are displayed in the lower portion.For Clip thumbnails, a still image is displayed in the upperportion, and the file name, KEY indicator, recorded time(number of frames), format, and file date are displayed in thelower portion.A maximum of up to 100 Still thumbnails and 100 Clipthumbnails can be displayed.On a single screen, 8 thumbnails are displayed in 2 rows of 4thumbnails each. For more than 8 thumbnails, thumbnails areswitched one row at a time.When moving the cursor with [F2] (the SELECT item), if thecursor is at the image in the lower-right corner (or upper-leftcorner), moving to the right (or left) switches pages.p Never remove the memory card while thumbnail display isin progress.
