Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 29 page image

291. Basic operations1-4-3. Selecting ShapeSquare, Circle, Heart, Star or Flower can be selected as theshape used for combining PinP images.1 Press the p button to light its indicator, and display thePinP1 menu (or PinP2 menu).2 Use [F1] to display the PinP sub menu.3 Use [F2] and, using the Shape item, select the shapeused for combining images.4 Use [F3] to adjust the transmissivity (darkness) applyingwhen the images are combined using the Density item.1-4-4. PinP previewSelect whether to output the PinP1 and PinP2 previewimages to the preview output.1 On the PinP sub menu, use [F5] to set the PVW item.On An image with the PinP1 (or PinP2) effectadded is output to the preview output.Off An image without the PinP1 (or PinP2) effectadded is output to the preview output. The PVW On and Off settings can be allocated to theuser buttons.When “PinP1 PVW” (or “PinP2 PVW”) is assigned to auser button, the PinP1 image (or PinP2 image) previewoutput is turned on or off every time the user button ispressed.When “PinP PVW” is assigned to a user button, thePinP1 image and PinP2 image preview outputs aresimultaneously turned on or off every time the userbutton is pressed. Refer to “3-3-1. Setting the user buttons”.1-4-5. PinP transitions1 Set the transition time.On the Time menu, use [F1] to display the PinP1 submenu (or PinP2 sub menu).As with background transitions, set the transition time. Refer to “1-1-6. Auto transition”.2 When the [PinP1 ON] button (or [PinP2 ON] button)in the transition area is pressed, the PinP1 image (orPinP2 image) transitions (fades in) for the length of thetransition time that has been set.During fade-in, the [PinP1 ON] button (or [PinP2ON] button) blinks in red, and when the transition iscompleted, it lights in red.When the [PinP1 ON] button (or [PinP2 ON] button) ispressed after fade-in is completed, the PinP1 image (orPinP2 image) transitions (fades out).During fade-out, the [PinP1 ON] button (or [PinP2ON] button) lights in red, and when the transition iscompleted, it goes off.If the [PinP1 ON] button (or [PinP2 ON] button) ispressed at any point during a transition, the direction ofthe transition is reversed.