101. Basic operations1-2-2. Selecting the wipe directionOperate the wipe direction selector buttons to select the wipedirection for the background transition.(The key transitions are set by the menu. The direction whichis set here will not be reflected.) See “1-3-3. Key transitions”.ANBBABABABRAA BAN/RBA BWhen the [R] indicator is off:Wiping proceeds in the normal direction.When the [R] indicator is lit:Wiping proceeds in the reverse direction.When the [N/R] indicator is lit:The normal direction is replaced with the reversedirection (or vice versa) when the transition iscompleted.(The lit and extinguished statuses of the [R] button arealso switched in line with the direction of the wiping.)1-2-3. Wipe decorations (border, softeffect)A border effect or soft effect can be added to the wiping ofbackground transitions.Setting the border and soft effect1 Press the b button to light its indicator, and display theBackground menu.2 Use [F1] to display the Border sub menu.3 Use [F2] to set On (or Off) for the border using theBorder item.4 Use [F3] to set the width of the border using the Widthitem.5 Use [F4] to set the amount of soft effect using the Softitem.When “On” has been selected as the Border itemsetting, the ratio of the soft effect to the border width isindicated as the amount of soft effect.When only the soft effect is to be added to wipe, select“Off” as the Border item setting.Setting the border color1 On the Background menu, use [F1] to display theBorder Color sub menu.2 Use [F2], [F3] and [F4] to adjust the Hue, Sat and Lumof the border color.w To call the preset colorUse [F5] to select the preset color using the Load item,and press the [F5]. When [F5] is pressed, what has been set so far iscanceled and replaced with the preset color values. To save the values that were set before calling the presetcolor, refer to “1-10. Memory”.
