Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 30 page image

301. Basic operations1-4-6. PinP adjustmentsAdjusting the PinP position and sizeWhile the PinP menu is selected, adjust the X and Ycoordinates using the positioner in the positioner area, andadjust the size using the rotary encoder [Z]. Alternatively, thesettings can be performed on the menus.1 Press the p button to light its indicator, and display thePinP1 menu (or PinP2 menu).2 Use [F1] to display the Position sub menu.3 Either operate the positioner and the rotary encoder [Z]or use [F2], [F3] and [F4] to set the X and Y coordinatesand the size using the X-Pos, Y-Pos and Size items.Select the dot by dot modeWhen the system is set to the HD mode and an SD formatimage is to be used for the PinP material, the images can becombined in the dot by dot mode (actual-size images).In this mode, the SD format image will not be up-converted soimage deterioration can be prevented.p When “100.00” has been selected as the Size itemsetting on the Position sub menu, the size used for thecombination will be the same number of lines as the SDformat image.1 Press the i button to light its indicator, and display theInput menu.2 Use [F2] to select the signals for inputting the PinPmaterial using the Select item.3 Use [F1] to display the FS sub menu.4 Use [F3] to select “Dot by Dot” using the Mode item, andpress the [F3] to enter the selection.SD HDSDPinP materialPinP combined image