Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 81 page image

812. Input/output signal settings2-1-10. Setting the DVI input signalsSet the DVI input signals when the DVI input board (option) or full-HD DVI input board (option) has been connected.Signals with the following resolutions can be input.DVI input signals Standard(Digital)DVI Input Board(Digital/Analog): AV-HS04M3Full-HD DVI Input Board(Digital): AV-HS04M8XGA(1024  768)/60 Hz   WXGA(1280  768)/60 Hz   SXGA(1280  1024)/60 Hz   WSXGA+(1680  1050)/60 Hz  — UXGA(1600  1200)/60 Hz  — WUXGA(1920  1200)/60 Hz  — 1080/59.94p(1920  1080)/59.94 Hz  — 1080/50p(1920  1080)/50 Hz  — 1080/59.94i(1920  1080)/59.94 Hz  — —1080/50i(1920  1080)/50 Hz  — —720/59.94p(1280  720)/59.94 Hz  — —720/50p(1280  720)/50 Hz  — —: Can be set.—: Cannot be set.p If signals with any other resolutions or frequencies are input, the signals cannot be imported correctly.The images which are output at a time like this may be black or disturbed.p These boards are incompatible with the HDCP (High-bandwidth Digital Content Protection).1 On the Input sub menu, use [F2] to select the input tobe set using the Select item. Refer to “2-1. Input signal settings”.2 Use [F1] to display the DVI Input sub menu.3 Use [F2] to select the signal system using the Modeitem. Set this when the DVI input board (AV-HS04M3) hasbeen connected.Digital Digital input signals of the DVI connector areeffective.Analog Analog input signals of the DVI connector areeffective.4 Use [F3] to select the scaling method.Fit-V The aspect ratio of the input images ismaintained, and the size of the images isincreased or reduced in accordance with thevertical resolution.Fit-H The aspect ratio of the input images ismaintained, and the size of the images isincreased or reduced in accordance with thehorizontal resolution.Full The size of the input images is increasedor reduced in accordance with the systemresolution.(The aspect ratio of the input images is notkept the same. The rate at which the imagesize is increased or reduced in the verticaldirection and in the horizontal directiondiffers.)For details on the sizes that correspond to the formats,refer to “DVI input scaling size table” (on page 82).