Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 62 page image

621. Basic operations When [F5] (Stop) is pressed, the recording of themoving images is stopped. If the [VMEM] button on the right of the number keysis pressed and the video memory operation mode hasbeen established, the operation of this button is linkedwith the P button among the number keys. Thumbnails of moving images are displayed on thethumbnail screen.While the thumbnails are displayed, the followinginformation is also displayed on the thumbnail screen.Current playback position (time), IN point position,OUT point position With the moving images on which the key signalsare recorded, a white “” mark is displayed for thethumbnail icons. The recording time is displayed in the Total Time itemof the Video Memory3 sub menu. However, if trimminghas been performed, the time from the IN point to theOUT point after trimming is displayed.Also, “On” is displayed for the Key item when the keysignals have been recorded.1-11-3. Saving Images in Flash MemoryData for images stored in the video memory can be retainedeven when the power is turned off, by saving them in the flashmemory area.Whether to automatically save the image data stored in thevideo memory when the data is transferred from the AUX busor to manually save them must be set.p If power to the unit is turned off when the saving ofdata has not finished, video memory data will be lost.p Video memory data that has been saved is alwaysrestored when the power is turned on. To cancel therestoration of video memory, press the [VMEM] buttonand switch to video memory operation mode, and thenpress [F3] to cancel.p If the unit is initialized, video memory that has beensaved to flash memory will be lost.Caution1 Press the v button to light its indicator, and display theVideo Memory menu.2 Use [F1] to display the Memory sub menu.3 Use [F2] to select the saving method using the Modeitem.Auto Automatic savingManual Manual saving4 Use [F3] to select the video memory for saving data inthe flash memory area using the Select item.If “All” is selected, all video memory will be saved.Video memory that has finished being recorded is savedto the flash memory area.5 Press the [F5] (Save) to save data in the flash memoryarea. [F3] (Select) and [F5] (Save) are enabled when“Manual” is selected for the Mode item. When “Auto” is selected for the Mode item, if videomemory recording is stopped, the video memory issaved to the flash memory area immediately afterrecording stops.However, if the power is cut off during recording,the video memories will not be saved in the flashmemory area.