361. Basic operations1-5-3. DSK transitions1 Set the transition time.Press the t button to light its indicator, and display theTime menu.2 Use [F1] to display the DSK sub menu.As with background transitions, set the transition time. Refer to “1-1-6. Auto transition”.3 When the [DSK ON] button in the transition area ispressed, the DSK image is combined (fades in) for thelength of the transition time that has been set.During fade-in, the [DSK ON] button blinks in red, andwhen the transition is completed, it lights in red.When the [DSK ON] button is pressed after fade-in iscompleted, the DSK image transitions (fades out).During fade-out, the [DSK ON] button lights in red, andwhen the transition (fade-out) is completed, it goes off.If the [DSK ON] button is pressed at any point during atransition, the direction of the transition is reversed.1-5-4. DSK previewSelect whether to output the DSK preview image to thepreview output.1 Press the d button to light its indicator, and display theDSK menu.2 Use [F1] to display the DSK sub menu.3 Use [F5] to set the PVW item.On An image with the DSK effect added is outputto the preview output.Off An image without the DSK effect added isoutput to the preview output.The PVW On and Off settings can be allocated to the userbuttons. Refer to “3-3-1. Setting the user buttons”.1-5-5. DSK adjustmentsThe DSK definition can be adjusted.1 Press the d button to light its indicator, and display theDSK menu.2 Use [F1] to display the Adjust sub menu.3 Use [F2], [F3] and [F4] to adjust the DSK (downstreamkey) definition.4 Use [F5] to set key invert.If “On” is set, the key signals generated internally areinverted.Operation/Parameter Description of setting Setting rangeF2/ClipReference level forgenerating key signals 0.0 to 108.0F3/Gain Key amplitude 0.0 to 200.0F4/Density Key density 0.0 to 100.0F5/Invert Key signal inversion On, Off
