962. Input/output signal settings2-5. Setting the multi view display2-5-1. Setting the screen layoutThe following nine options are available as split screenlayouts.4Split 5-aSplit 5-bSplit6-aSplit 6-bSplit 9Split10-aSplit 10-bSplit 16SplitDisplay of the following signals can be assigned to subscreens 1 to 16.Signals that can be assignedSDI IN1 to SDI IN8, DVI IN, IN-A1, IN-A2, IN-B1, IN-B2, CBGD1,CBGD2, Still1V, Still1K, Still2V, Still2K, Clip1V, Clip1K, Clip2V,Clip2K, PGM, PVW, MEM-PVW, Key Out, AUX1 to AUX4, Clock43214Split2153 45-bSplit2153 45-aSplit2163 4 56-bSplit21653 46-aSplit7 8 94 5 61 2 39Split17 8 9 103 4 5 6210-bSplit13 4 5 67 8 9 10210-aSplit1 2 3 45 6 7 89 10 11 1213 14 15 1616Split1 Press the x button to light its indicator, and display theMulti View Display menu.2 Use [F1] to display the MV Split sub menu.3 Use [F2] to set the split-screen display mode using theSplit item.4 Use [F1] to display the MV Pattern 1/4 to MV Pattern4/4 sub menus.5 Use [F2] to [F5] to set the names of the signals to bedisplayed on the sub screens (1 to 16).SDI IN1 to SDI IN8, DVI IN, IN-A1, IN-A2, IN-B1, IN-B2,CBGD1, CBGD2, Still1V, Still1K, Still2V, Still2K, Clip1V,Clip1K, Clip2V, Clip2K, PGM, PVW, MEM-PVW, Key Out,AUX1 to AUX4, Clock When the input signals (SDI IN1 to SDI IN8, DVI IN,IN-A1, IN-A2, IN-B1 or IN-B2) have been selected, thematerial name set using the Input menu Name submenu is displayed (with up to 10 characters). When the input signals have been selected by the AUXbuses (AUX1 to AUX4), the first four characters of thematerial name is displayed inside [ ].Display that appears when IN1 (CAM1) has been selectedby the AUX1:AUX1[CAM1]Display that appears when IN2 (CAMERA2) has beenselected by the AUX2:AUX2[CAME] When the AUX bus for which “MV” has been selectedis displayed on the sub screen of the multi view display,the images are looped as if two mirrors were facing eachother.
