371. Basic operations1-5-6. DSK decorationsA border, shadow or other type of edge can be added to DSK.Setting the edge1 Press the d button to light its indicator, and display theDSK menu.2 Use [F1] to display the Edge1 sub menu.3 Use [F2] to select the edge type.Off An edge is not added.Border A border is added around the entire edge.Drop A diagonal border is added.Shadow A shadow is added.Outline An outline (only a border with no fill) is added.Border DropOutlineShadow4 Use [F3] to set the edge width.5 Use [F4] to set the direction (in 45-degree increments)in which “Drop” and “Shadow” will be added.(Top)(Bottom)(Right)(Left)225180 270135 3154590 06 Use [F5] to set the darkness (Density) of the edges.Setting Edge FillMaterials to be inserted as edges can be set.1 On the DSK menu, use [F1] to display the Edge2 submenu.2 Use [F2] to select the edge material using the Edge Fillitem.Color The color set using Edge Color is used.CBGD1 The color background is used.CBGD2Still1 The still image video memory (Still1) is used.Still2 The still image video memory (Still2) is used.Clip1 The moving image video memory (Clip1) isused.Clip2 The moving image video memory (Clip2) isused.Setting the edge color1 On the DSK menu, use [F1] to display the Edge Colorsub menu.2 Use [F2], [F3] and [F4] to adjust the Hue, Sat and Lumof the edge color.w To call the preset colorUse [F5] to select the preset color using the Load item,and press the [F5]. When [F5] is pressed, what has been set so far iscanceled and replaced with the preset color values. To save the values that were set before calling the presetcolor, refer to “1-10. Memory”.
