Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410N: Brochure & specs Operating instructions

Contents

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 89 page image

892. Input/output signal settings2-2-3. Setting the DVI output signalsSet the DVI output signals of the standard output (DVI OUT) and the DVI output signals if the DVI/analog output board (option)has been connected.1 On the Output sub menu, use [F2] to select the output to be set using the Select item. Refer to “2-2. Output signal settings”.2 Use [F1] to display the DVI Output sub menu.3 Use [F2] to select the signal system using the Mode item. Set this when the DVI/analog output board (AV-HS04M5) has been connected.Digital DVI digital signals are output from the DVI connector.Analog DVI analog signals (RGB) are output from the DVI connector.When “Analog” has been selected, the display position of the image may be off depending on the monitorwhich is connected. If it is off, adjust the position at the monitor.For details on the adjustment method, refer to the operating instructions of the monitor.4 Use [F3] to select the resolution of the images to be output using the Size item.Auto The equipment information of the output destination is captured by the DVI signals, and the images areoutput at the optimum resolution.The vertical frequency is 60 Hz, and the maximum resolution is SXGA for analog output signals andWUXGA for digital output signals.If the equipment information cannot be captured or if the resolution and frequency which can be output bythe unit are not contained in the equipment information, the images will be output at the XGA setting.Other signals are listed in the table below.DVI output signal Standard output (DVI OUT) DVI/Analog Output Board:AV-HS04M5Size Output (Digital) (Digital) (Analog)XGA (1024  768)/60 Hz   WXGA (1280  768)/60 Hz   SXGA (1280  1024)/60 Hz   WSXGA+ (1680  1050)/60 Hz   —UXGA (1600  1200)/60 Hz   —WUXGA (1920  1200)/60 Hz   —1080/59.94i (1920  1080)/59.94 Hz  — —1080/50i (1920  1080)/50 Hz  — —720/59.94p (1280  720)/59.94 Hz  — —720/50p (1280  720)/50 Hz  — —: Can be set.—: Cannot be set. The DVI signals cannot be output if the system format is 1080/23.98PsF or 1080/24PsF.