2- 38 Printing with Cut SheetsTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic UsePrinting with Cut SheetsLoading Cut SheetsThis is the general procedure for printing cut sheets.If there is a cut sheet in the printer, remove it.(→ P.2-35, P.2-42)On the printer operation panel, select cut sheet as thepaper feed source. (→ P.2-38)Place the cut sheet on the platen. (→ P.2-39)On the printer operation panel, select the media type.(→ P.2-40)Adjust the amount of media feed. (→ P.4-43)Start the print job from the computer. (→ P.1-38)Importantz Make sure to turn OFF the power supply to the printerbefore loading the cut sheets. Further, if the paper typethat has been loaded, and the paper type set using theoperation panel, are different, a paper load error willoccur, and print quality may be reduced.Notez Store unused cut sheets in the original package. Storethe package in a cool, dry location that is not exposedto direct sunlight. Selecting the Paper SourceWhen printing on cut sheets, set the media source to cutsheet using the operation panel.1 Press and hold the Paper Source button for1 second or more to light the Cut Sheetlamp.When a roll is loaded, the printer will displayRemove RllMedia?If another cut sheet has been set, press and hold theStop/Eject button for 1 second or more. RemoveCutSheet? will be displayed.2 If the cut sheet or roll media is set to theprinter, press the OK button.Remove the cut sheets or roll media.(→ P.2-35, P.2-42)Importantz If you load a cut sheet with roll paper loaded in theprinter, this may cause a jam. Before loading a cutsheet, we recommend that you remove the roll paper.To use the printer with roll paper loaded, wrap a sheetof paper (A3 size or larger) around the roll and fastenthe sheet with a piece of tape to prevent the roll fromloosening.Remove RllMedia?Press OK/StopDataInformation PowerOfflineMenuMessageOffline Feed PaperOnlineCleaning(3 sec.)Stop/Eject(1 sec.)
