6- 44 Reinstalling the USB or IEEE1394 DriverTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic UseReinstalling the USB or IEEE1394 DriverIf you try to install the USB or IEEE1394 driver with the USBor IEEE1394 cable already connected to the printer, thedriver may not be installed correctly.In such a case, follow the procedure below to install theprinter driver after reinstalling the USB or IEEE1394 driver.1 Right click the My Computer icon thenselect Properties.2 On the Hardware sheet, click DeviceManager. Next, in the Device Managerwindow click the Other Devices icon thenclick the Properties button.3 Click the Driver tab then click the UpdateDriver... button. When the Upgrade DeviceDriver Wizard opens, follow the instructionson the screen to complete the installation.4 When the Wizard prompts you to select howto search for the driver source files, selectonly CD-ROM drive. Set the User SoftwareCD-ROM in the CD-ROM drive then followthe instructions on the screen to install theinterface driver.5 Next, when the Add New Hardware Wizardopens, follow the instructions on the screen.6 Select only Specify a location then click theBrowse button.7 Select the printer driver folder.z Windows Me/Windows 98 Open the CD-ROM, open the appropriatelanguage folder, then Drivers / WinMe_9X /Driver / OK.z Windows Server 2003/Windows XP/Windows2000 Open the CD-ROM, open the appropriatelanguage folder, then Drivers / WinXP_2K /Driver / OK.8 Confirm that the correct folder has beenselected for Specify a location then installthe driver.
