|
5- 47 Initializing the Network SettingsトップChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexTOPContentsChapter 2Using Various MediaChapter 1Basic UseInitializing the Network SettingsFollow the procedure below to use the Web browser(Remote UI) to restore all the network settings to the factorydefault settings.Notez In addition to using the Web browser to restore thedefault settings, you can also use GARO Device SetupUtility or the printer operation panel to restore thedefault network settings.1 Start the Web Browser and enter thefollowing URL in the Location or Addressbox, then press the Enter key.http:// /Sample: http://XXX.XXX.XXX.XXX/2 Select Administrator Mode and then clickthe Logon button.When Remote UI is started with the network card set tothe factory default settings, the English screen will bedisplayed. Set Language to Japanese, selectAdministrator Mode, and then press the Logon button.Remote UI starts.Notez If a password has been setup on the printer, enter thepassword and then press the OK button. If a passwordhas not been setup, you do not need to enter apassword.3 From the Device Manager menu on the left,select Network.4 Click the Reset to Default Settings button.5 Verify the message then click the OK button.All network information is restored to the defaultsettings.Notez When you initialize the network settings, the printer IPaddress setting is changed to the factory default valueof (0.0.0.0), so the remote UI screen is not displayedagain in the browser. Set it through GARO DeviceSetup Utility or printer operation panel if you set thenetwork settings.
|
