2- 46 Using the Media Take-up UnitTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic UseUsing the Media Take-up UnitIf you are using the optional media take-up unit, paper thathas been printed from roll media can be spooledautomatically. This is convenient if you are printing a largequantity continuously. Refer to the following table for thepaper types that can be used with the media take-up unit.If you are using the media take-up unit, perform thefollowing procedure. Loading the Roll Media (→ P.2-28) Set the media take-up unit to Enable using theoperation panel (→ P.2-47) Mount the roll media in the media take-up unit(→ P.2-47) Printing (→ P.1-38) Remove printed paper from the media take-up unit(→ P.2-53) Set the media take-up unit to Disable using theoperation panel (→ P.2-56)Importantz If you are using the media take-up unit, do not tread onthe sensor, or place any object between the sensorand the paper. This could cause misoperation.z If you are using the media take-up unit, auto cuttingcannot be performed regardless of the the auto cuttersetting. If Auto Cut is turned ON in the printer driver,however, auto cutting will be performed, so check thatthe auto cutter is turned OFF before printing.z If you are using cut sheets, the media take-up unitcannot be used.z With some print media, the hue of some colors may changeslightly when the ink on the surface of the media has driedcompletely. Make sure the ink is dry before performing thefinal coloring check or handling the printed matter.z If you are printing large quantities of ink onto thin, weak papersuch as thin coated paper, etc., spooling may not operatecorrectly in humid environments. In such cases, improve theoperating environment, or use the ink drying time function tomake sure the ink is dry before the paper is spooled.z Fabric banner and synthetic paper may not spoolcorrectly in humid environments.Paper Types that Can Be Spooled Paper Types thatCannot Be Spooled• Coated Paper• Heavyweight Coated Paper• Premium Matte Paper• Extra Heavyweight Coated Paper• Glossy Photo Paper• Semi-Glossy Photo Paper• Heavyweight SemiGlos Photo Paper• Heavyweight Glossy Photo Paper• Synthetic Paper• Adhesive Synthetic Paper• Backlit Film• Flame-Resistant cloth• Fabric Banner• Proofing paper• Fine Art Photo• Fine Art Heavyweight Photo• Fine Art Textured• Canvas Matte• Colored Coated Paper• Plain Paper• Plain Paper(High Quality)• Newsprint forProofing• Canvas Semi-Glossy• Japanese PaperWashi• CAD Plain Paper• CAD Tracing Paper• CAD TranslucentMatte Film• CAD Clear film
