4- 44 Adjusting the Amount of Media FeedTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic Use4 Press [] or [] to select Adjust Band,then press [].5 Press [] or [] to select Standard Adj. orAdvanced Adj., then press [].6 Press [] or [] to select Yes, then pressOK button.The printer prints band adjustment pattern B andreads the results of the print as it prints toautomatically adjusts the settings for the amount ofmedia feed for the currently loaded media.When settings are finished, the printer returnsOnline.Adjusting Media Feed ManuallyIf horizontal lines or bands appear in printouts, the amountof media feed can be manually fine tuned to be eithergreater or smaller. Follow the procedure below to make theadjustment manually.1 Press the Online button to display MAINMENU.2 Press [] or [] to select Adjust Printerthen press [].3 Press [] or [] to select Adjust Band,then press [].4 Press [] or [] to select Fine Tuning,then press [].Displays the current value of the setting.Adjust PrinterAdjust Band ↓Adjust BandStandard Adj. ↓Standard Adj.YesMAIN MENUAdjust Printer ↓Adjust PrinterAdjust Band ↓Adjust BandFine Tuning ↓MAIN MENUHead CleaningOnlineCleaning(3 sec.)Stop/Eject(1 sec.)
