4- 41 Aligning the PrintheadTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic UseAligning the PrintheadIf printed vertical lines are bent, or if colors are faded anduneven, adjust the printhead position. The printer will print theprinthead adjustment pattern and read the pattern as it prints itto adjust the position of the printhead automatically. Before youadjust the position of the printhead, make sure roll media or cutsheets of A3 size or wider are loaded in the printer.Follow this procedure to adjust the printhead.Notez When you adjust the printhead, you should use the typeof media (other than film) that you use most frequently.z If you are using cut sheets, make sure you load atleast one sheet of unused A3 paper (not the blank sideof used paper).Aligning Printhead Procedure1 If the printer power is off, press the Powerbutton to turn the printer on.Within a short time, Online or Offline is displayed.2 Press the Online button to display MAINMENU.3 Press [] or [] to select Adjust Printerthen press [].4 Press [] or [] to select Auto Head Adj.,then press [].MAIN MENUAdjust Printer ↓Adjust PrinterAuto Head Adj. ↓DataInformation PowerOfflineMenuMessageOnlineCleaning(3 sec.)Stop/Eject(1 sec.)MAIN MENUHead CleaningOnlineCleaning(3 sec.)Stop/Eject(1 sec.)
