1- 19 Function MenusTOPChapter 3Printing by ObjectiveChapter 4MaintenanceChapter 5Using the Printerin a NetworkEnvironmentChapter 6TroubleshootingChapter 7Operating theFunction MenuIndexContentsChapter 2Using Various MediaChapter 1Basic UseMenu Settings Summary TablesEach menu has the functions described below. Setting values marked with an asterisk “*” are the default settings for thecorresponding menu items. MAIN MENUMenu Item Setting Values FunctionHead Cleaning Head Cleaning A Cleans the printhead.Head Cleaning B Performs stronger cleaning than Head Cleaning A.Force Cutting No, Yes Executes a roll cut at the current position. If thereis 10 cm or less from the edge of the paper,however, the paper will be fed to the prescribedlength before cutting is performed. If the feedamount is too small, cutting will not be performed.This menu item is displayed only while “RollMedia” is selected for printing. 20cm If the feedamount is too small, cutting will not be performed.Chng Head Hght No, Yes Adjusts the height of the Printhead. (→ P.2-43)Auto Feed No, Yes Selects whether or not to perform automaticwinding using the Media Take-up Unit. Thismenu is displayed only if the Take-up Reel hasbeen turned Enable.Take-up Reel Disable*,Enable Selects whether or not to use the Media Take-up Unit.Media Type Plain Paper*, CAD Plain Paper, PlainPaper HQ, Recycled Coated, CoatedPaper, HW Coated, Premium Matte, ExHW Coated, Glossy Photo, Semi-Gl Photo,HW Glossy Photo, HW SemiGl Photo, Syn.Paper, Adh. Syn. Paper, Backlit Film,Flame-Res.Cloth, Fabric Banner, Proofingpaper, News Proof 1, News Proof 2, NewsProof 3, FineArt Photo, FneArt HW Photo,FineArt Txtr, Canvas Matte, Canvas Semi-Gl, JPN Paper Washi, Colored Coated,CAD Trace Paper, CAD Matte Film, CADClear Film, Special 1-5Selects the media type. Only the names of thetypes of media that can be used with thecurrently installed ink tank are displayed.(→ P.2-4)
